Material | Magnetic Boards
- Robust Alu-Dibond panel in 3 mm thickness (Alu-Dibond composite material consists of two thin aluminum panels that enclose a polyethylene core in black)*
- Laminated with 0.75 mm thick magnetic ferrous film and a matt UV protective film to prevent reflections
- Magnetic pull: 55 g/sqcm
- High magnetic adhesion: Holds all larger magnets up to approx. 70 g (e.g. kitchen magnets, vacation magnets); photos can also be attached with magnets**
- Print resolution: Ultra-sharp Fine-Art Print in 2,400 dpi resolution – for perfect readability
- Shockproof packaging, full recyclable
- Hanging system option A: with hanging plates
- Hanging system option B: with aluminum gallery suspension – for a floating look (easy to assemble thanks to the plug connection)
- Hanging not pre-assembled (assembly instruction is enclosed & will also be sent separately by e-mail)
- Mounting instructions: The adhesive must harden for at least 24 hours before hanging.
* The cut edges of an Alu-Dibond board are slightly rough. Please mount with care.
** Due to the many different sizes and weights of commercially available weights, we cannot give a general guarantee for the adhesive force.
Good to know: Magnets require a minimum distance between them so that they do not attract or repel each other due to their polarity. The larger a magnet, the greater the distance between the magnets must be. We recommend these little magnetic pins – they allow a relatively high density of place markers.